page_banner

Products

18 Years Factory Trailer Wheel Bearings - N307-E single row Cylindrical roller bearing – CWL

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The key to our success is "Good Product Excellent, Reasonable Rate and Efficient Service" for Rubber Covered Bearings, Stainless Steel Bearings, Ball Joint Rod End, We're searching ahead to setting up long-term company associations with you. Your comments and solutions are remarkably appreciated.
18 Years Factory Trailer Wheel Bearings - N307-E single row Cylindrical roller bearing – CWL Detail:

Single-row cylindrical roller bearings with a cage comprising cylindrical rollers caged between a solid outer and inner ring. These bearings have a high level of rigidity, can support heavy radial loads and are suitable for high speeds. The inner and outer rings can be fitted separately, making installation and removal a simple process.

The outer ring of an N series cylindrical bearing has no ribs, whereas the inner ring of the cylindrical bearing has two fixed ribs. This means that the N series cylindrical bearing cannot locate the shaft, therefore the axial displacement of the shaft relative to the casing can be accommodated in both directions.

Pressed steel or machined brass cages are generally used, but sometimes molded polyamide cages are also used.

The N307-E single row Cylindrical roller bearing , “E” suffix designates higher radial load capacity .

N307-E single row Cylindrical roller bearing detail Specifications

Main Dimensions
Bore diameter(d):35mm
Outer diameter( D): 80mm
Withd(B): 21mm
Chamfer dimension(r min.):1.5mm
Chamfer dimension(r1 min.):1.1mm
Permissible axial displacement(S max.):1.2MM
Raceway diameter of outer ring(E):70.2mm
Static load ratings(Cor):56.7KN
Dynamic load ratings(Cr): 68.4KN

ABUTMENT DIMENSIONS
Diameter of spacer sleeve(da min.):43 mm
Diameter of spacer sleeve(da max.):68 mm
Diameter of housing abutment(Da min.):72 mm
Diameter of housing abutment (Da max.):73.4 mm
Radius of fillet(ra max.):1.5 mm
Radius of fillet(rb max.):1 mm


Product detail pictures:

18 Years Factory Trailer Wheel Bearings - N307-E single row Cylindrical roller bearing – CWL detail pictures


Related Product Guide:

We have been experienced manufacturer. Wining the majority of the crucial certifications of its market for 18 Years Factory Trailer Wheel Bearings - N307-E single row Cylindrical roller bearing – CWL , The product will supply to all over the world, such as: Qatar, Argentina, Tanzania, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.
  • Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By Gabrielle from Israel - 2017.03.28 12:22
    This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Mario from Algeria - 2017.10.27 12:12
    Write your message here and send it to us