Factory supplied China Roller Bearing - NA2206-2RS Support rollers bearings without flange rings, with an inner ring – CWL
Factory supplied China Roller Bearing - NA2206-2RS Support rollers bearings without flange rings, with an inner ring – CWL Detail:
Yoke type roller bearing track rollers are mounted on a shaft or stud. They are not mounted in a housing bore but supported on a flat raceway (mating track).
1.Accommodate high radial loads
The thick-walled outer ring enables high radial loads, while reducing distortion and bending stresses.
2.Long service life
The crowned outer ring running surface is beneficial for applications where outer ring tilting relative to the track may occur or where edge stresses need to be minimized.
The yoke type track roller NA2206-2RS can support high radial loads. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.
NA2206-2RS Support rollers bearings consists of a thick-walled outer ring with profiled outside surface profile and a needle roller and cage assembly.
seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
NA2206-2RS Support rollers bearings detail Specifications
Main Dimensions
Outer diameter(D):62mm
Tolerance for outer diameter: -0.013mm to 0 mm
Bore diameter(d):30mm
Tolerance for Bore diameter:-0.01mm to 0 mm
Width inner ring(B):20mm
Width outer ring(C): 19.8mm
Tolerance for width :-0.12mm to 0 mm
Raceway diameter inner ring(Fw):35mm
Recess diameter outer ring shoulder(D1) min.:43mm
Chamfer dimension inner ring(r1 min.):0.3mm
Chamfer dimension outer ring(r min.) :1.0mm
Dynamic load ratings(Cr):18.4KN
Static load ratings(Cor):25.5KN
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our organization for your long-term to establish alongside one another with shoppers for mutual reciprocity and mutual benefit for Factory supplied China Roller Bearing - NA2206-2RS Support rollers bearings without flange rings, with an inner ring – CWL , The product will supply to all over the world, such as: Egypt, Ireland, Benin, With strong technical strength and advanced production equipment, and SMS people purposefully , qualified, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.
By Elva from Czech - 2018.10.01 14:14
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Michelle from Roman - 2018.09.12 17:18
