Good Quality Engine Rings And Bearings - PWTR1542-2RS track roller bearings Support rollers, with flange rings, with an inner ring – CWL
Good Quality Engine Rings And Bearings - PWTR1542-2RS track roller bearings Support rollers, with flange rings, with an inner ring – CWL Detail:
The Features of PWTR1542-2RS Support rollers, with flange rings, with an inner ring
Since the bearing has not got a cage, it has a particularly high load capacity by the maximum number of rolling elements and supports high radial and also high axial loads In addition, there is a reduction of friction due to the open space between the roller sets which is filled with grease, relatively high and also permanent axial loads can thus be supported.
with inner ring, can be used if the surface of the shaft is not suitable as a raceway.
with axial guidance,the axial guidance is carried out by the central rib and the rolling elements.
PWTR1542-2RS detail Specifications
Main Dimensions
Outer diameter(D):42mm
Bore diameter(d):15mm
Width inner ring(B):19mm
Width outer ring(C): 18mm
Outside diameter flange ring(D1):20mm
Chamfer dimension flange ring bore(r1 min.):0.3mm
Chamfer dimension outer ring(r min.) :0.6mm
Dynamic load ratings(Cr):13.5KN
Static load ratings(Cor):14.1KN
Permissible dynamic radial load:
Fr per:14.1KN
F0r per:14.1KN
Product detail pictures:
Related Product Guide:
It is actually our accountability to satisfy your needs and effectively serve you. Your pleasure is our best reward. We're on the lookout forward for your stop by for joint growth for Good Quality Engine Rings And Bearings - PWTR1542-2RS track roller bearings Support rollers, with flange rings, with an inner ring – CWL , The product will supply to all over the world, such as: moldova, Mongolia, Mexico, We have got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.
By Colin Hazel from Burundi - 2017.03.28 12:22
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Dorothy from Guatemala - 2018.09.21 11:01
