Good quality Machinery Bearing - 608 Single Row Deep groove ball bearing – CWL
Good quality Machinery Bearing - 608 Single Row Deep groove ball bearing – CWL Detail:
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.For big deep groove ball bearings, machined brass cages are used
Single-Row Deep Groove Ball Bearings is the typical deep groove ball bearing that has a single raceway. These are usually robust and made from durable materials, ensuring that these bearings have an extended service life.608 is single row with open type Deep groove ball bearing.
Single-row deep groove ball bearings are also subdivided into other types, ranging from 3 mm to 400 mm bore sizes, suitable for almost any application.
608,608 ZZ,608 2RS detail Specifications
Main Dimensions
Bore diameter (d):8mm
Bore diameter Tolerance:-0.008mm to 0
Outer diameter (D): 22mm
Outer diameter Tolerance:-0.008mm to 0
Width (B): 7mm
Width Tolerance:-0.12mm to 0
Chamfer Dimension( r) min.:0.3mm
Dynamic load ratings(Cr): 2.763KN
Static load ratings(Cor): 1.165KN
ABUTMENT DIMENSIONS
Abutment diameter shaft (da)min.:10mm
Abutment diameter housing(Da).:max.20mm
Radius of shaft or housing fillet(ra)max.:0.3 mm
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization for that long-term to establish jointly with customers for mutual reciprocity and mutual gain for Good quality Machinery Bearing - 608 Single Row Deep groove ball bearing – CWL , The product will supply to all over the world, such as: Swiss, Ukraine, Munich, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Gemma from Romania - 2017.11.01 17:04
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Barbara from Germany - 2017.08.28 16:02
