Manufactur standard Bike Ball Bearings - KP000 ZINC ALLOY BEARING UNITS with 10mm bore – CWL
Manufactur standard Bike Ball Bearings - KP000 ZINC ALLOY BEARING UNITS with 10mm bore – CWL Detail:
KP000 bearing is Mini Zinc Plated Pillow Block with Set Screw Locking Ball Bearing in Unit, Both Sides Rubber Sealed and pre-Lubricated with Grease.
Ball bearing units consist of a precision wide inner ring bearing assembled into a housing made of cast iron or pressed steel. Units are pre-lubricated and are designed to slip fit on to the shaft. Locking method is either set screw locking, eccentric self-locking or concentric. On cast iron and pressed steel units, the outside diameter of the bearing and the inside diameter of the housing are sphered, allowing the bearing to swivel within the housing to accommodate initial alignment.
There are numerous bearing and housing combinations to accommodate a diversity of mounting surfaces, load requirements, shaft sizes and dimensional requirements.
KP000 ZINC ALLOY BEARING UNITS detail Specifications
Main Dimensions
Shaft Dia d:10mm
Height (h): 18mm
a: 67mm
e:53mm
b:16mm
s:7mm
g: 6mm
w: 35mm
Bi: 14mm
n: 4mm
Bolt size:M6
Basic dynamic load rating:12.7 KN
Basic static load rating :6.7 KN
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Manufactur standard Bike Ball Bearings - KP000 ZINC ALLOY BEARING UNITS with 10mm bore – CWL , The product will supply to all over the world, such as: Romania, Johor, Cannes, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Dale from Canada - 2017.05.31 13:26
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Kimberley from Las Vegas - 2017.08.18 18:38
