page_banner

Products

N307-E single row Cylindrical roller bearing

Short Description:

The cylindrical roller Bearing are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds.
There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearings). The main difference for the row Cylindrical roller bearing is depending on the design or absence of side ribs).


Product Detail

Product Tags

Single-row cylindrical roller bearings with a cage comprising cylindrical rollers caged between a solid outer and inner ring. These bearings have a high level of rigidity, can support heavy radial loads and are suitable for high speeds. The inner and outer rings can be fitted separately, making installation and removal a simple process.

The outer ring of an N series cylindrical bearing has no ribs, whereas the inner ring of the cylindrical bearing has two fixed ribs. This means that the N series cylindrical bearing cannot locate the shaft, therefore the axial displacement of the shaft relative to the casing can be accommodated in both directions.

Pressed steel or machined brass cages are generally used, but sometimes molded polyamide cages are also used.

The N307-E single row Cylindrical roller bearing , "E" suffix designates higher radial load capacity .

N307-E single row Cylindrical roller bearing detail Specifications

Material:52100 Chrome Steel
Construction:Single Row
Seal Type :open type
Cage:Steel,brass or Nylon
Cage Material:Steel,brass or Polyamide(PA66)
Limiting Speed:6300 rpm
Packing:Industrial packing or single box packing
Weight:0.44kg

N307-E single row Cylindrical roller bearing

Main Dimensions
Bore diameter(d):35mm
Outer diameter( D): 80mm
Withd(B): 21mm
Chamfer dimension(r min.):1.5mm
Chamfer dimension(r1 min.):1.1mm
Permissible axial displacement(S max.):1.2MM
Raceway diameter of outer ring(E):70.2mm
Static load ratings(Cor):56.7KN
Dynamic load ratings(Cr): 68.4KN

ABUTMENT DIMENSIONS
Diameter of spacer sleeve(da min.):43 mm
Diameter of spacer sleeve(da max.):68 mm
Diameter of housing abutment(Da min.):72 mm
Diameter of housing abutment (Da max.):73.4 mm
Radius of fillet(ra max.):1.5 mm
Radius of fillet(rb max.):1 mm


  • Previous:
  • Next:

  • Write your message here and send it to us