NUP244-EM Single Row Cylindrical roller bearing
The NUP244-EM is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in a cage. This cage prevents contact between the cylinder rollers, so this bearing type can support higher speeds than full-complement cylinder roller bearings. Also, single row cylindrical roller bearings with cages are very rigid and they can take high radial forces. As the inner and outer rings of these bearings can be easily disassembled, they are very easy to install.
The applications of single row cylindrical roller bearings including: gearboxes, agricultural machinery, pumps, compressors, and electric motors.
The NUP244-EM is a single row cylindrical bearing with NUP design. The outer ring has two rigid ribs, while the inner ring has one rigid and one loose rib. As a result, this bearing can take radial forces as well as axial forces in both directions. NUP bearings are used as locating bearings. Locating bearings locate a shaft axially in both directions.
The NUP244-EM cage material: brass. Special strength and durability under extreme conditions such as shock loads and vibrations, high acceleration forces and lack of lubrication.
NUP244-EM Single Row Cylindrical roller bearing detail Specifications
Material:52100 Chrome Steel
Construction:Single Row
Seal Type :open type
Limiting Speed:1960 r/min
Cage Type:Brass
Cage material:High Strength Machined Brass
Weight:38.6 kg
Main Dimensions
Bore diameter(d):220mm
Outer diameter(D): 400mm
Width(B): 65mm
B1:10
Chamfer dimension(r min.):4.0mm
Chamfer dimension(r1 min.):4.0mm
Chamfer dimension of loose flange ring(F):268mm
Permissible axial displacement(s max.):2.1 mm
Static load ratings(Cor):1188KN
Dynamic load ratings(Cr): 855KN
ABUTMENT DIMENSIONS
Diameter of spacer sleeve(da min.):238mm
Diameter of shaft abutment(db min.):288 mm
Diameter of housing abutment (Da max.):383 mm
Radius of fillet(ra max.):3 mm