China Original Factory Center Bearing - KMTA 15 Precision lock nuts with locking pin – CWL manufacturers and suppliers

Original Factory Center Bearing - KMTA 15 Precision lock nuts with locking pin – CWL

Short Description:

Product Detail

Product Tags

Feedback (2)

Now we have superior devices. Our solutions are exported to your USA, the UK and so on, enjoying a superb name between customers for Rolling Mill Bearing, Miniatrue ball bearing, Stainless Steel Miniature Bearings, Sincerely hope we are growing up together with our prospects all over the environment.

Original Factory Center Bearing - KMTA 15 Precision lock nuts with locking pin – CWL Detail:

Precision lock nuts with locking pins,KMT and KMTA lock nuts are intended for applications where high precision, simple assembly and reliable locking are required. The three, equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components.

KMT and KMTA lock nuts should not be used on shafts with keyways in the thread or adapter sleeves. Damage to the locking pins can result if they align with either.

KMTA lock nuts are available for thread M 25×1,5 to M 200×3 (sizes 5 to 40)have a cylindrical outside surface and, for some sizes, a different thread pitch than KMT lock nuts are intended primarily for applications where space is limited and the cylindrical outside surface can be used as an element of a gap-type seal

KMT and KMTA series precision lock nuts have three locking pins equally spaced around their circumference that can be tightened with set screws to lock the nut onto the shaft. The end face of each pin is machined to match the shaft thread. The locking screws, when tightened to the recommended torque, provide sufficient friction between the ends of the pins and the unloaded thread flanks to prevent the nut from loosening under normal operating conditions .

KMTA 15 Precision lock nuts with locking pin detail Specifications

Main Dimensions
Thread (G):M75X1.5
Outer diameter(d2):100mm
Outer diameter locating side face(d3):91mm
Inner diameter locating side face(d4):77mm
Width(B):26mm
Pitch diameter for pin-type face spanner(J1):88mm
Distance between holes for pin-wrench and locating side face(J2):13mm
Diameter holes for pin-type face spanner(N1):6.4mm
Set / Locking screw size:M8

Product detail pictures:

Related Product Guide:

go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for Original Factory Center Bearing - KMTA 15 Precision lock nuts with locking pin – CWL , The product will supply to all over the world, such as: Lesotho, Boston, Jamaica, Our solutions have national accreditation requirements for qualified, good quality items, affordable value, was welcomed by individuals all over the world. Our goods will continue to improve inside the order and appear forward to cooperation with you, Really should any of those items be of interest to you, please letus know. We will be satisfied to provide you a quotation up on receipt of the detailed needs.

Ball Bearing In Cycle