Professional Design Stainless Steel Linear Bearings - UCFL205 Two Bolt Oval Flange bearing Units with 25mm bore – CWL
Professional Design Stainless Steel Linear Bearings - UCFL205 Two Bolt Oval Flange bearing Units with 25mm bore – CWL Detail:
The Features of UCFL205 Two Bolt Oval Flange bearing Units
1.consisting of a ball bearing insert UC 205 and a cast iron housing FL 205
2.the design as a 2-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads
3.the housing is made of cast iron and therefore inexpensive and robust
4.the bearing insert has an extended inner ring with grub screws
5.The flange bearing is mounted on the shaft using two grub screws
6.smooth running and good behavior with tilting due to the extended inner ring
7.static misalignments can be compensated up to an angle of 2°
8.two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
9.lubricated for life; under normal operating conditions relubrication is not required
housing with integrated lubrication hole
10.to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil
UCFL205 detail Specifications
Main Dimensions
Shaft Dia diameter:25mm
Overall height(a): 130mm
Distance between attachment bolts(e): 99mm
Diameter of attachment bolt hole(i):16mm
Flange width(g):13mm
l:27mm
Diameter of attachment bolt hole(S):16mm
Overall length(b):68mm
Overall unit width(Z):35.8mm
t:40mm
Width of inner ring(B):34.1mm
n:14.3mm
Bolt Size:M14
Dynamic Load Rating: 14KN
Static Load Rating: 7.8KN
MOUNTING INFORMATION
Set screw G2:M6x1
Hexagonal key size for set screw :3.05 mm
Recommended tightening torque for set screw :4 Nm
Recommended diameter for attachment bolts, mm G:14 mm
Recommended diameter for attachment bolts, inch G:0.563 in
Product detail pictures:
Related Product Guide:
We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for Professional Design Stainless Steel Linear Bearings - UCFL205 Two Bolt Oval Flange bearing Units with 25mm bore – CWL , The product will supply to all over the world, such as: Dubai, Armenia, Moldova, Our items have national accreditation requirements for qualified, high quality goods, affordable value, was welcomed by people today all over the world. Our products will continue to enhance within the order and look forward to cooperation with you, Should really any of these products and solutions be of curiosity to you, be sure to letus know. We are likely to be content to offer you a quotation up on receipt of your detailed needs.
By Miguel from New Zealand - 2017.09.22 11:32
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Olga from Leicester - 2017.05.02 11:33
