page_banner

Products

QJ322 Four point Angular Contact Ball Bearing

Short Description:

The Four point contact ball bearings comprise solid outer rings, split inner rings and ball and cage assemblies with brass or polyamide cages. The two-piece inner rings enable a large complement of balls to be accommodated. The inner ring halves are matched to the particular bearing and must not be interchanged with those of other bearings of the same size. The outer ring with the ball and cage assembly can be mounted separately from the two inner ring halves.The contact angle is 35°


Product Detail

Product Tags

QJ322  Four point Angular Contact Ball Bearing  detail Specifications:

Metric series

Material : 52100 Chrome Steel

Construction : Single Row

Seal Type : Open type

Limiting speeds (grease) : 2300 rpm

Limiting speeds (Oil ) : 3100 rpm

Cage : Brass cage or Nylon cage

Cage Material : Brass or polyamid (PA66)

Weight : 12.5 kg

 

Main Dimensions:

Bore diameter (d) 110 mm

Bore diameter Tolerance : -0.015 mm to 0 mm

Outer diameter (D) : 240 mm

Outer diameter Tolerance : -0.02 mm to 0 mm

Width (B) : 50 mm

Width Tolerance : -0.05 mm to 0 mm

Chamfer Dimension ( r) min. : 3.0 mm

Load center (a) : 101 mm

Fatigue load limit (Cu) :22.1 KN

Dynamic load ratings (Cr) 338KN

Static load ratings(Cor) : 680 KN

 

ABUTMENT DIMENSIONS

Abutment diameter shaft (da) min. : 124 mm

Abutment diameter housing (Da) Max. : 226 mm

Fillet radius (ras) Max. : 2.5 mm

图片1


  • Previous:
  • Next:

  • Write your message here and send it to us